Product introduction

Ceramic fiber modules are block-shaped products made by cutting (or folding) fiber blankets and then compressing them. The thickness of the insulation is increased through compressed stacking, making them suitable for kiln walls and furnace body insulation.

Product Features

• The module will squeeze tightly in different directions after unbinding, expanding without creating gaps.

• The elastic modules can resist mechanical forces.

• The elasticity of the modules can compensate for the deformation of the furnace shell, preventing gaps between modules.

• Low thermal conductivity brings high energy-saving effects.

• They possess the ability to resist any thermal shock.

• The lining does not require drying or maintenance, so it can be put into use immediately after installation.

• The anchoring system is positioned away from the hot face of the module, keeping the metal anchors at relatively low temperatures.

• Compared to traditional hard refractory bricks, they are lighter, achieving an overall lightweight design for the equipment.

Typical Application

• Heating furnace, reforming furnace, high-temperature decomposition pipeline.

• Steel: ladle cover, well-type heating furnace cover, heating furnace, single or multi-roll thin plate annealing furnace, continuous annealing and coating furnace, ring furnace, bottom-loaded furnace, roller-bottom furnace, hooded furnace, hot air duct and flue, etc.

• Aluminum processing: well-type heating furnace and furnace cover, crucible furnace, homogenizing furnace, flue.

• Ceramics: tunnel kiln for tableware firing and gap-type kiln.

• Technical ceramics firing kiln, flue, and flame insulation.

Our Packaging Method